Name: PT-G503-PHR-PTP SeriesEC 61850-3工業以太網交換機
Availability: InStock

PT-G503-PHR-PTP SeriesEC 61850-3工業以太網交換機返回列表頁

參考價:

面議

具體成交價以合同協議為準

產品型號

品牌

廠商性質經銷商

所在地

在線詢價加入對比查看聯系電話

更新時間：2022-03-12 08:03:12瀏覽次數：417次

聯系我時，請告知來自智能制造網

Features

IEC 61850-3, IEEE 1613 (power substations) compliant
IEC 62439-3 Clause 4 (PRP) and Clause 5 (HSR) compliant
PRP/HSR Coupling and QuadBox functions supported
Ethernet console reserved for local access
Built-in MMS server, based on IEC 61850-90-4 switch modeling for power SCADA
Hardware-based IEEE 1588v2 PTP supported
Design ready for NERC CIP compliance system development
Isolated redundant power inputs with universal 24/48 VDC or 110/220 VDC/VAC power supply range
-40 to 85°C operating temperature range

Introduction

The PT-G503-PHR-PTP series redundancy boxes (RedBoxes) are compliant with the latest standardized redundancy protocols for industrial automation networks, IEC 62439-3 Clause 4 (Parallel Redundancy Protocol, PRP) and IEC 62439-3 Clause 5 (High-availability Seamless Redundancy, HSR). PRP/HSR ensures the highest system availability and data integrity for mission-critical applications in electrical substation and/or process automation systems that require zero recovery time redundancy. The redundant protocols Coupling and QuadBox are also supported. With Coupling and QuadBox, HSR rings can be connected to make the redundant network more versatile. The PT-G503-PHR-PTP series comes with three 10/100/1000BaseT(X) and 100/1000BaseSFP slot combo ports.

One slot (INTERLINK port) is for an internal link for connecting with a SAN (Singly Attached Node). The other two ports (LAN A and LAN B ports) are for PRP/HSR redundant protocol communications. With this full Gigabit Ethernet port design, the PT-G503-PHR-PTP series provides high performance for PRP/HSR systems.

The PT-G503-PHR-PTP series also provides hardware-based IEEE 1588v2 PTP when in end-to-end one-step transparent clock mode for timing-critical applications and isolated redundant power inputs with 24/48 VDC or 110/220 VDC/VAC power supply ranges to increase the reliability of the power supply.

Technology
Standards	IEEE 802.3 for 10BaseT IEEE 802.3u for 100BaseT(X) and 100BaseFX IEEE 802.3ab for 1000BaseT(X) IEEE 802.3z for 1000BaseX
• Software Features
Management	IPv4/IPv6, PRP/HSR, SNMPv1/v2c/v3, DHCP Client, BootP, SMTP, RARP, HTTP, Telnet, LLDP, Flow Control, Back Pressure Flow Control, SNMP Inform, Port Mirror, Fiber Check, Syslog, RMON
Filter	Multicast Filter Behavior
Redundancy Protocols	PRP/HSR, RSTP Transparent
Security	RADIUS, TACACS+, Trusted Access Control, Authentication Certificate (SSL Certificate, SSH Key Regenerate)
Time Management	SNTP, NTP Server/Client, IEEE 1588v2 PTP
Industrial Protocols	Modbus/TCP
MIB	IEC 62439-3 MIB
Power Substation	MMS
• Interface
Gigabit Ethernet	3 x 10/100/1000BaseT(X) ports or 100/1000BaseSFP combo ports
Console Port	Ethernet console (10/100/1000 Mbps RJ45), USB-serial console (Type B connector)
Storage Port	USB storage (Type A connector for ABC-02-USB)
Alarm Contact	1 relay output with current carrying capacity of 1 A @ 24 VDC
Digital Inputs	1 input with the same ground, but electrically isolated from the electronics• +13 to +30 V for state “1" • -30 to +3 V for state “0" • Max. input current: 8 mA
• Power Requirements
Input Voltage	• WV: 24/48 VDC • HV: 110/220 VDC/VAC
Operating Voltage	• WV: 18 to 72 VDC • HV: 88 to 300 VDC, 85 to 264 VAC
Input Current	• Max. 0.660/0.360 A @ 24/48 VDC • Max. 0.150/0.080 A @ 110/220 VDC • Max. 0.260/0.170 A @ 110/220 VAC
Overload Current Protection	Present
Connection	5-pin terminal block
Reverse Polarity Protection	Present
• Physical Characteristics
Housing	Aluminum alloy
IP Rating	IP40 protection
Dimensions	80 x 160 x 110 mm (3.15 x 6.30 x 4.33 in)
Weight	1210 g (2.69 lb)
Installation	DIN-rail mounting
• Environmental Limits
Operating Temperature	-40 to 85°C (-40 to 185°F)
Storage Temperature	-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity	5 to 95% (non-condensing)
• Standards and Certifications
High Availability Automation Networks	IEC 62439-3
Safety	UL 508
EMI	FCC Part 15 Subpart B Class A, EN 55032 Class A
EMS	IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 35 V/m IEC 61000-4-4 EFT: Power: 4 kV; Signal: 4 kV IEC 61000-4-5 Surge: Power: 4 kV; Signal: 4 kV IEC 61000-4-6 CS: 10 V IEC 61000-4-8 IEC 61000-4-11
Electrical Substation	IEC 61850-3, IEEE 1613
Rail Traffic	EN 50121-4
• MTBF (mean time between failures)
Time	PT-G503-PHR-PTP-WV:440,857 hrs PT-G503-PHR-PTP-HV:566,844 hrs
Standard	Telcordia TR/SR
• Warranty
Warranty Period	5 years

Available Models

	Model No.	Description
	PT-G503-PHR-PTP-WV	IEC 61850-3 and IEC 62439-3 full Gigabit managed redundancy box, with 3 10/100/1000BaseT(X) ports or 100/1000Base SFP ports, 1 10/100/1000BaseT(X) Ethernet console port, 1 isolated dual power supply(24/48 VDC), -40 to 85°C operating temperature
	PT-G503-PHR-PTP-HV	IEC 61850-3 and IEC 62439-3 full Gigabit managed redundancy box, with 3 10/100/1000BaseT(X) ports or 100/1000Base SFP ports, 1 10/100/1000BaseT(X) Ethernet console port, 1 isolated dual power supply(88 to 300 VDC or 85 to 264 VAC), -40 to 85°C operating temperature

北京藍博遠揚科技發展有限公司

北京藍博遠揚科技發展有限公司

PT-G503-PHR-PTP SeriesEC 61850-3工業以太網交換機返回列表頁

Features

Introduction

Available Models

智能制造網

會員登錄

收藏該商鋪

提示

北京藍博遠揚科技發展有限公司

北京藍博遠揚科技發展有限公司

PT-G503-PHR-PTP SeriesEC 61850-3工業以太網交換機 返回列表頁

Features

Introduction

Available Models

智能制造網

會員登錄

收藏該商鋪

提示

客戶評價列表

PT-G503-PHR-PTP SeriesEC 61850-3工業以太網交換機返回列表頁